DVC12FRD 12-Inch Dual-Stack Ferrite Subwoofer β 2β8 Ohm, 400W RMS / 2750W Peak
Rs. 2,899.00
Sale price
Rs. 2,899.00
Regular price
Rs. 3,599.00
Skip to product information
π Estimated Delivery:
Warranty & replacements
1-year warranty against manufacturing defects. Replacement for damaged, defective or wrong items within 7 days of delivery, subject to policy terms. Report physical damage within 24 hours of receipt. For assistance, WhatsApp 9840024579 with your bill and photos or video. Warranty excludes installation damage, mismatched-amplifier overdrive, water damage and normal wear and tear.
Shipping
We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.
DVC12FRD 12-Inch Dual-Stack Ferrite Subwoofer β 2β8 Ohm, 400W RMS / 2750W Peak
Rs. 2,899.00
Sale price
Rs. 2,899.00
Regular price
Rs. 3,599.00
Free delivery within India on COD and prepaid orders. Estimated delivery: 3β5 business days.
π₯ Buy More, Save More!
| Buy 1 | Save βΉ40 |
Automatic discount at checkout.
| π³ Pay Online & Save an Extra βΉ40 |
Applied automatically on full prepaid orders at checkout.
A high-output 12-inch dual-coil subwoofer built for car, studio, cinema, and home audio. The Y30 grade dual-stack ferrite magnets, pure copper dual voice coils, and non-pressed stitched paper cone deliver deep, powerful bass with high motor strength and long Xmax. Configurable impedance from 2 Ohm (parallel) to 8 Ohm (series) for full wiring flexibility.
Key Specs:
- Impedance: 2β8 Ohm (DVC) | RMS: 400W (parallel) | Peak: 2750W
- Voice Coil: Pure copper, dual voice coil (2β8 Ohm configurable)
- Magnet: Y30 grade dual-stack ferrite, high motor strength
- Cone: Non-pressed paper, stitched surround, long Xmax
- Chassis: Stamped CR steel
- Connections: Dual push-fit steel terminals (series / parallel)
DVC12FRD wiring and RMS power
| Wiring configuration | Effective impedance | RMS power |
|---|---|---|
| Single coil | 4 Ohms | 195W |
| Both coils in parallel | 2 Ohms | 400W |
| Both coils in series | 8 Ohms | 100W |
These are three configurations of the same subwoofer. RMS power varies with the wiring configuration shown.
Amplifier matching: Match the wiring configuration to your amplifierβs supported speaker impedance. For parallel wiring, confirm that the amplifier supports a 2-Ohm load in the operating mode you intend to use. Check the amplifierβs RMS output at the selected impedance, rather than comparing peak wattage alone.
Recommended Enclosure: 75 Litre L-Port
Use: Car audio, studio, cinema, home audio
Warranty: 1 year / 7-day replacement